Descriere
Robinet cu Termostat DONEXON Pro Z-Wave Thermostat by Danfoss
Compatibil cu FIBARO HC3
Informații despre produs „DONEXON Pro Z-Wave Thermostat de la Danfoss”
Termostatul DONEXON Pro Z-Wave este un termostat electronic pentru radiator controlat Z-Wave. Se aplică pentru a fi montat pe robinete de încălzire de perete și le controlează de un motor. Dispozitivul acceptă un punct de referință care este fie setat manual folosind butoanele locale de pe dispozitiv, fie fără fir folosind Z-Wave. Pe lângă setarea temperaturii dorite, dispozitivul va suporta și protecție împotriva înghețului. Un mic afișaj LCD de pe dispozitiv arată temperatura țintă la cerere.
Dispozitivul deține alte funcții inteligente, cum ar fi detectarea ferestrelor deschise sau o funcție de antrenare a supapelor pentru a se asigura că supapele sunt încă funcționale după perioade mai lungi.
Termostatul DONEXON Pro Z-Wave poate fi montat cu puține mișcări pe supape cu conector standard M30x1,5 sau RA2000 (Danfoss snap in). Dispozitivul se așteaptă la o conexiune radio regulată la gateway-ul Z-wave pentru schimbul de mesaje de stare.
Caracteristici:
Termostat pentru calorifere pe baza de apa
Butoane de control local
Afișaj LCD (temperatura țintă)
Pentru supape cu conector standard M30x1,5 (30x1,5) sau RA2000 (Danfoss snap in).
Motor cu zgomot redus
Protecția Copilului
Tehnologie wireless: Z-Wave
Cod produs : DONEVARMOTZPRO
Compatibility with FIBARO HC3 - yes
The DONEXON Pro Z-Wave Thermostat is a Z-Wave controlled electronic radiator thermostat. It is applied to be mounted on wall heating valves and controls them by a motor. The device accepts a set point that is either set manually using local buttons on the device or wirelessly using Z-Wave. Besides setting a desired temperature the device will also support frost protection. A small LCD display on the device shows the target temperature on request.
The device owns further intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.
DONEXON Pro Z-Wave Thermostat can be mounted with few movements to valves with standard M30x1.5 connector or RA2000 (Danfoss snap in). The device expects a regular radio connection to Z-wave gateway for status message exchange.
Features:
- Thermostat for water-based radiators
- Local control buttons
- LCD display (target temperature)
- For valves with standard M30x1.5 connector (30x1,5) or RA2000 (Danfoss snap in).
- Low-noise motor
- Child protection
- Wireless Technology: Z-Wave
SKU : DONEVARMOTZPRO
.